MySmartGrid Developer Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== German Version ====== 

Please find the German version of this document here: [[chumbyqtcontrolpanel-de]].

Bitte klicken Sie hier für die deutsche Version dieses Dokuments: [[chumbyqtcontrolpanel-de]].

====== Download ======

You can find a "ready to use" image for an usb stick [[http://files.paalsteek.de/msg/chumby-usb.zip|here]](zip) or [[http://files.paalsteek.de/msg/chumby-usb.tar.gz|here]](tar.gz).

====== USB-Stick preperations ======

Unpack the image on an USB-Stick (min. 100 MB) and edit flukso.conf to represent your own flukso.

Configuration file format:
<code>
[General]
ip=192.168.1.102
port=80
sensor1=d69779ec53a9323b695ee86b5328dd28
sensor2=
sensor3=
sen1ena=1
sen2ena=0
sen3ena=0
</code>

**ip**: IP-Address of the flukso \\
**port**: 80 for flukso v1, 8080 for flukso v2 \\
**sensor1**: sensor-id of the first sensor \\
**sensor2**: sensor-id of the second sensor \\
**sensor3**: sensor-id of the third sensor \\
**sen1ena**: 1 = plot sensor 1, 0 = don't plot sensor 1 \\
**sen2ena**: 1 = plot sensor 2, 0 = don't plot sensor 2 \\
**sen2ena**: 1 = plot sensor 3, 0 = don't plot sensor 3 \\
====== Running the code ======

To run the code simply plug your prepared USB-Stick to your chumby and restart the device.

The Chumby will now install the newest version of the chumby software. Please do not turn off the device during this procedure.

The device will restart during the update. This is normal and intended.

After the installation of the new software the touchscreen calibration will start. Follow the instructions on the screen to calibrate your touchscreen.

After calibration the Qt controlpanel starts. You are ready to go.

====== I'm not happy and want the old interface back ======

This software is not installed on your Chumby permanently. If you want the original interface back just remove the USB-Stick and restart your Chumby.

====== I have a problem or the software is misbehaving ======

You can either join the IRC-Channel #mysmartgrid on freenode or send a bugreport to msg-support@itwm.fraunhofer.de

====== Changelog ======
**09.03.2012**:
  * Radioplugin working now
  * Volume range modified

**20.03.2012**:
  * Radioplugin supports up to 6 presets now.
  * RDS support added
  * Fluksometer plugin fixed

**05.05.2012**:
  * Alarm clock added
MySmartGrid Developer Wiki

User Tools

Site Tools

Page Tools
