MySmartGrid Developer Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== vzlogger HowTo =====

You can find the source for the vzlogger under: https://github.com/kaikrueger/vzlogger/tree/c++-port

There are also binary package available at http://packages.mysmartgrid.de/

* for Ubuntu 10.4LTS
Add to the file /etc/apt/sources.list

  ## mysmartgrid
  deb http://packages.mysmartgrid.de/ubuntu [Open URL] lucid mysmartgrid
  
* Ubuntu 12.0 LTS


then run:
  sudo aptitude update
  sudo aptitude search vzlogger
  sudo aptitude install vzlogger


==== Configuration ====


See also: http://wiki.volkszaehler.org/software/controller/vzlogger


Changes in the new version:

=== Meter configuration ===

There is a new parameter:
        "enabled" : true,       /* disabled meters will be ignored */

=== Channel configuration ===

There are several new parameters:

  * When using volkszaehler as middleware you need:

        "protocol" : "vz", /* volkszaehler.org */


  * When using mysmartgrid as middleware you need:

       "protocol" : "mysmartgrid",
       "device"    : "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
       "uuid" :      "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
       "secretKey" : "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx",
       "interval" : 300, /* */
       "identifier" : "1-0:1.8.0",
       //"scaler" : 1,  /* sml counter is in Wh */
       "scaler" : 1000,  /* d0 counter is in kWh */


where the values for device, uuid, and secretKey are created by using the uuidgen command.



The values for device and secretKey will be the same for each channel.
  
  
Before starting the vzlogger, the logger must be registrated by running:
     vzlogger -r
     
  
On mysmartgrid.de you have to connect to the logger of your mysmartgrid account. There for you on the page 'Geräte' and use the first 10 character (without '-') of the configured device-uuid.
MySmartGrid Developer Wiki

User Tools

Site Tools

Page Tools
