User Tools

Site Tools


fluksosetup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

fluksosetup [2014/03/19 15:04]
paalsteek [API modifications needed]
fluksosetup [2014/11/25 14:02] (current)
paalsteek led images added
Line 12: Line 12:
  
 Note: The success of this step will be indicated by the lan led on the device itself. This is not possible as the lan led is controlled by the network hardware and indicates a link on the ethernet port. Note: The success of this step will be indicated by the lan led on the device itself. This is not possible as the lan led is controlled by the network hardware and indicates a link on the ethernet port.
 +
 +{{ :fluksoled-01011.png?200 |}}
  
 == Possible errors == == Possible errors ==
Line 17: Line 19:
   * The network cable is not connected correctly or it is faulty   * The network cable is not connected correctly or it is faulty
     *  This results in a missing link and therefore the lan led does not light up     *  This results in a missing link and therefore the lan led does not light up
 +{{ :fluksoled-00011.png?200 |}}
   * The router does not supply a DHCP address nor an IPv6 configuration   * The router does not supply a DHCP address nor an IPv6 configuration
     *  The Flukso will retry configuring the interface regularly but there is currently no way to indicate this situation to the user     *  The Flukso will retry configuring the interface regularly but there is currently no way to indicate this situation to the user
Line 23: Line 26:
  
 After establishing the link, the Flukso tries to communicate with the msg server and sends a heartbeat containing the shared secret. During this step the globe led is flashing. The success of this step will be indicated by the globe led on the Flukso. In this step also the list of available sensors has to be sent to the server. After establishing the link, the Flukso tries to communicate with the msg server and sends a heartbeat containing the shared secret. During this step the globe led is flashing. The success of this step will be indicated by the globe led on the Flukso. In this step also the list of available sensors has to be sent to the server.
 +
 +{{ :fluksoled-01111.png?200 |}}
  
 == Possible errors == == Possible errors ==
Line 49: Line 54:
  
 When the device is configured this configuration will be transmitted to the flukso with the next heartbeat. A heartbeat can be triggered manually by pressing the reset button of the flukso for 2-5 seconds. The success of the configuration is indicated via the leds on the flukso as well as on the device page of the mySmartGrid web platform. A working WiFi connection is indicated by the WiFi led, a working network connection to the server is indicated by the globe led. When the device is configured this configuration will be transmitted to the flukso with the next heartbeat. A heartbeat can be triggered manually by pressing the reset button of the flukso for 2-5 seconds. The success of the configuration is indicated via the leds on the flukso as well as on the device page of the mySmartGrid web platform. A working WiFi connection is indicated by the WiFi led, a working network connection to the server is indicated by the globe led.
 +
 +{{ :fluksoled-11111.png?200 |}}
  
 == Possible errors == == Possible errors ==
Line 57: Line 64:
  
 When using WiFi the user can now disconnect the wired interface and the setup proces is finished. When using WiFi the user can now disconnect the wired interface and the setup proces is finished.
 +
 +{{ :fluksoled-10111.png?200 |}}
  
 ===== API modifications needed ===== ===== API modifications needed =====
fluksosetup.txt ยท Last modified: 2014/11/25 14:02 by paalsteek